初始化，终结和线程¶

在Python初始化之前¶

在一个植入了 Python 的应用程序中，Py_Initialize() 函数必须在任何其他 Python/C API 函数之前被调用；例外的只有个别函数和全局配置变量。

在初始化Python之前，可以安全地调用以下函数：

备注

以下函数 不应该 在 Py_Initialize(): Py_EncodeLocale(), Py_GetPath(), Py_GetPrefix(), Py_GetExecPrefix(), Py_GetProgramFullPath(), Py_GetPythonHome(), Py_GetProgramName() 和 PyEval_InitThreads() 前调用。

全局配置变量¶

Python 有负责控制全局配置中不同特性和选项的变量。这些标志默认被命令行选项。

当一个选项设置一个旗标时，该旗标的值将是设置选项的次数。例如，-b 会将 Py_BytesWarningFlag 设为 1 而 -bb 会将 Py_BytesWarningFlag 设为 2.

int Py_BytesWarningFlag¶

当将 bytes 或 bytearray 与 str 比较或者将 bytes 与 int 比较时发出警告。如果大于等于 2 则报错。

由 -b 选项设置。

int Py_DebugFlag¶

开启解析器调试输出（限专家使用，依赖于编译选项）。

由 -d 选项和 PYTHONDEBUG 环境变量设置。

int Py_DontWriteBytecodeFlag¶

如果设置为非零, Python 不会在导入源代码时尝试写入 .pyc 文件

由 -B 选项和 PYTHONDONTWRITEBYTECODE 环境变量设置。

int Py_FrozenFlag¶

当在 Py_GetPath() 中计算模块搜索路径时屏蔽错误消息。

由 _freeze_importlib 和 frozenmain 程序使用的私有旗标。

int Py_HashRandomizationFlag¶

如果 PYTHONHASHSEED 环境变量被设为非空字符串则设为 1。

如果该旗标为非零值，则读取 PYTHONHASHSEED 环境变量来初始化加密哈希种子。

int Py_IgnoreEnvironmentFlag¶

忽略所有 PYTHON* 环境变量，例如可能设置的 PYTHONPATH 和 PYTHONHOME。

由 -E 和 -I 选项设置。

int Py_InspectFlag¶

当将脚本作为第一个参数传入或是使用了 -c 选项时，则会在执行该脚本或命令后进入交互模式，即使在 sys.stdin 并非一个终端时也是如此。

由 -i 选项和 PYTHONINSPECT 环境变量设置。

int Py_InteractiveFlag¶: 由 -i 选项设置。

int Py_IsolatedFlag¶

以隔离模式运行 Python. 在隔离模式下 sys.path 将不包含脚本的目录或用户的 site-packages 目录。

由 -I 选项设置。

3.4 新版功能.

int Py_LegacyWindowsFSEncodingFlag¶

如果该旗标为非零值，则使用 mbcs 编码和``replace`` 错误处理句柄，而不是 UTF-8 编码和 surrogatepass 错误处理句柄作用 filesystem encoding and error handler。

如果 PYTHONLEGACYWINDOWSFSENCODING 环境变量被设为非空字符串则设为 1。

更多详情请参阅 PEP 529。

可用性: Windows。

int Py_LegacyWindowsStdioFlag¶

如果该旗标为非零值，则会使用 io.FileIO 而不是 io._WindowsConsoleIO 作为 sys 标准流。

如果 PYTHONLEGACYWINDOWSSTDIO 环境变量被设为非空字符串则设为 1。

有关更多详细信息，请参阅 PEP 528。

可用性: Windows。

int Py_NoSiteFlag¶

禁用 site 的导入及其所附带的基于站点对 sys.path 的操作。如果 site 会在稍后被显式地导入也会禁用这些操作 (如果你希望触发它们则应调用 site.main())。

由 -S 选项设置。

int Py_NoUserSiteDirectory¶

不要将 用户 site-packages 目录 添加到 sys.path。

由 -s 和 -I 选项以及 PYTHONNOUSERSITE 环境变量设置。

int Py_OptimizeFlag¶: 由 -O 选项和 PYTHONOPTIMIZE 环境变量设置。

int Py_QuietFlag¶

即使在交互模式下也不显示版权和版本信息。

由 -q 选项设置。

3.2 新版功能.

int Py_UnbufferedStdioFlag¶

强制 stdout 和 stderr 流不带缓冲。

由 -u 选项和 PYTHONUNBUFFERED 环境变量设置。

int Py_VerboseFlag¶

每次初始化模块时打印一条消息，显示加载模块的位置（文件名或内置模块）。如果大于或等于 2，则为搜索模块时检查的每个文件打印一条消息。此外还会在退出时提供模块清理信息。

由 -v 选项和 PYTHONVERBOSE 环境变量设置。

初始化和最终化解释器¶

void Py_Initialize()¶

Part of the Stable ABI.

初始化 Python 解释器。在嵌入 Python 的应用程序中，它应当在使用任何其他 Python/C API 函数之前被调用；请参阅在 Python 初始化之前了解少数的例外情况。

这将初始化已加载模块表 (sys.modules)，并创建基本模块 builtins、__main__ 和 sys。它还会初始化模块搜索路径 (sys.path)。它不会设置 sys.argv；如有需要请使用 PySys_SetArgvEx()。当第二次调用时 (在未事先调用 Py_FinalizeEx() 的情况下) 将不会执行任何操作。它没有返回值；如果初始化失败则会发生致命错误。

备注

在 Windows 上，将控制台模式从 O_TEXT 改为 O_BINARY，这还将影响使用 C 运行时的非 Python 的控制台使用。

void Py_InitializeEx(int initsigs)¶: Part of the Stable ABI.
如果 initsigs 为 1 则该函数的工作方式与 Py_Initialize() 类似。如果 initsigs 为 0，它将跳过信号处理句柄的初始化注册，这在嵌入 Python 时可能会很有用处。

int Py_IsInitialized()¶: Part of the Stable ABI.
如果 Python 解释器已初始化，则返回真值（非零）；否则返回假值（零）。在调用 Py_FinalizeEx() 之后，此函数将返回假值直到 Py_Initialize() 再次被调用。

int Py_FinalizeEx()¶

Part of the Stable ABI since version 3.6.

撤销 Py_Initialize() 所做的所有初始化操作和后续对 Python/C API 函数的使用，并销毁自上次调用 Py_Initialize() 以来创建但尚未销毁的所有子解释器（参见下文 Py_NewInterpreter() 一节)。在理想情况下，这会释放 Python 解释器分配的所有内存。当第二次调用时（在未再次调用 Py_Initialize() 的情况下），这将不执行任何操作。正常情况下返回值是 0。如果在最终化（刷新缓冲数据）过程中出现错误，则返回 -1。

提供此函数的原因有很多。嵌入应用程序可能希望重新启动Python，而不必重新启动应用程序本身。从动态可加载库（或DLL）加载Python解释器的应用程序可能希望在卸载DLL之前释放Python分配的所有内存。在搜索应用程序内存泄漏的过程中，开发人员可能希望在退出应用程序之前释放Python分配的所有内存。

程序问题和注意事项: 模块和模块中对象的销毁是按随机顺序进行的；这可能导致依赖于其他对象（甚至函数）或模块的析构器（即 __del__() 方法）出错。 Python 所加载的动态加载扩展模块不会被卸载。 Python 解释器所分配的少量内存可能不会被释放（如果发现内存泄漏，请报告问题）。对象间循环引用所占用的内存不会被释放。扩展模块所分配的某些内存可能不会被释放。如果某些扩展的初始化例程被调用多次它们可能无法正常工作；如果应用程序多次调用了 Py_Initialize() 和 Py_FinalizeEx() 就可能发生这种情况。

引发一个审计事件 cpython._PySys_ClearAuditHooks，不附带任何参数。

3.6 新版功能.

void Py_Finalize()¶: Part of the Stable ABI.
这是一个不考虑返回值的 Py_FinalizeEx() 的向下兼容版本。

进程级参数¶

int Py_SetStandardStreamEncoding(const char *encoding, const char *errors)¶

此 API 被保留用于向下兼容：应当改为设置 PyConfig.stdio_encoding 和 PyConfig.stdio_errors，参见 Python 初始化配置。

如果要调用该函数，应当在 Py_Initialize() 之前调用。它指定了标准 IO 使用的编码格式和错误处理方式，其含义与 str.encode() 中的相同。

它覆盖了 PYTHONIOENCODING 的值，并允许嵌入代码以便在环境变量不起作用时控制 IO 编码格式。

encoding 和/或 errors 可以为 NULL 以使用 PYTHONIOENCODING 和/或默认值（取决于其他设置）。

请注意无论是否有此设置（或任何其他设置），sys.stderr 都会使用 "backslashreplace" 错误处理句柄。

如果调用了 Py_FinalizeEx()，则需要再次调用该函数以便影响对 Py_Initialize() 的后续调用。

成功时返回 0，出错时返回非零值（例如在解释器已被初始化后再调用）。

3.4 新版功能.

3.11 版后已移除.

void Py_SetProgramName(const wchar_t *name)¶

Part of the Stable ABI.

此 API 被保留用于向下兼容：应当改为设置 PyConfig.program_name，参见 Python 初始化配置。

如果要调用该函数，应当在首次调用 Py_Initialize() 之前调用它。它将告诉解释器程序的 main() 函数的 argv[0] 参数的值（转换为宽字符）。 Py_GetPath() 和下面的某些其他函数会使用它在相对于解释器的位置上查找可执行文件的 Python 运行时库。默认值是 'python'。参数应当指向静态存储中的一个以零值结束的宽字符串，其内容在程序执行期间不会发生改变。 Python 解释器中的任何代码都不会改变该存储的内容。

Use Py_DecodeLocale() to decode a bytes string to get a wchar_* string.

3.11 版后已移除.

wchar_t *Py_GetProgramName()¶

Part of the Stable ABI.

返回用 Py_SetProgramName() 设置的程序名称，或默认的名称。返回的字符串指向静态存储；调用者不应修改其值。

此函数不应在 Py_Initialize() 之前被调用，否则将返回 NULL。

在 3.10 版更改: 现在如果它在 Py_Initialize() 之前被调用将返回 NULL。

wchar_t *Py_GetPrefix()¶

Part of the Stable ABI.

Return the prefix for installed platform-independent files. This is derived through a number of complicated rules from the program name set with Py_SetProgramName() and some environment variables; for example, if the program name is '/usr/local/bin/python', the prefix is '/usr/local'. The returned string points into static storage; the caller should not modify its value. This corresponds to the prefix variable in the top-level Makefile and the --prefix argument to the configure script at build time. The value is available to Python code as sys.prefix. It is only useful on Unix. See also the next function.

此函数不应在 Py_Initialize() 之前被调用，否则将返回 NULL。

在 3.10 版更改: 现在如果它在 Py_Initialize() 之前被调用将返回 NULL。

wchar_t *Py_GetExecPrefix()¶

Part of the Stable ABI.

Return the exec-prefix for installed platform-dependent files. This is derived through a number of complicated rules from the program name set with Py_SetProgramName() and some environment variables; for example, if the program name is '/usr/local/bin/python', the exec-prefix is '/usr/local'. The returned string points into static storage; the caller should not modify its value. This corresponds to the exec_prefix variable in the top-level Makefile and the --exec-prefix argument to the configure script at build time. The value is available to Python code as sys.exec_prefix. It is only useful on Unix.

Background: The exec-prefix differs from the prefix when platform dependent files (such as executables and shared libraries) are installed in a different directory tree. In a typical installation, platform dependent files may be installed in the /usr/local/plat subtree while platform independent may be installed in /usr/local.

Generally speaking, a platform is a combination of hardware and software families, e.g. Sparc machines running the Solaris 2.x operating system are considered the same platform, but Intel machines running Solaris 2.x are another platform, and Intel machines running Linux are yet another platform. Different major revisions of the same operating system generally also form different platforms. Non-Unix operating systems are a different story; the installation strategies on those systems are so different that the prefix and exec-prefix are meaningless, and set to the empty string. Note that compiled Python bytecode files are platform independent (but not independent from the Python version by which they were compiled!).

System administrators will know how to configure the mount or automount programs to share /usr/local between platforms while having /usr/local/plat be a different filesystem for each platform.

此函数不应在 Py_Initialize() 之前被调用，否则将返回 NULL。

在 3.10 版更改: 现在如果它在 Py_Initialize() 之前被调用将返回 NULL。

wchar_t *Py_GetProgramFullPath()¶

Part of the Stable ABI.

Return the full program name of the Python executable; this is computed as a side-effect of deriving the default module search path from the program name (set by Py_SetProgramName() above). The returned string points into static storage; the caller should not modify its value. The value is available to Python code as sys.executable.

此函数不应在 Py_Initialize() 之前被调用，否则将返回 NULL。

在 3.10 版更改: 现在如果它在 Py_Initialize() 之前被调用将返回 NULL。

wchar_t *Py_GetPath()¶

Part of the Stable ABI.

Return the default module search path; this is computed from the program name (set by Py_SetProgramName() above) and some environment variables. The returned string consists of a series of directory names separated by a platform dependent delimiter character. The delimiter character is ':' on Unix and macOS, ';' on Windows. The returned string points into static storage; the caller should not modify its value. The list sys.path is initialized with this value on interpreter startup; it can be (and usually is) modified later to change the search path for loading modules.

此函数不应在 Py_Initialize() 之前被调用，否则将返回 NULL。

在 3.10 版更改: 现在如果它在 Py_Initialize() 之前被调用将返回 NULL。

void Py_SetPath(const wchar_t*)¶

Part of the Stable ABI since version 3.7.

此 API 被保留用于向下兼容：应当改为采用设置 PyConfig.module_search_paths 和 PyConfig.module_search_paths_set，参见 Python 初始化配置。

Set the default module search path. If this function is called before Py_Initialize(), then Py_GetPath() won't attempt to compute a default search path but uses the one provided instead. This is useful if Python is embedded by an application that has full knowledge of the location of all modules. The path components should be separated by the platform dependent delimiter character, which is ':' on Unix and macOS, ';' on Windows.

This also causes sys.executable to be set to the program full path (see Py_GetProgramFullPath()) and for sys.prefix and sys.exec_prefix to be empty. It is up to the caller to modify these if required after calling Py_Initialize().

Use Py_DecodeLocale() to decode a bytes string to get a wchar_* string.

The path argument is copied internally, so the caller may free it after the call completes.

在 3.8 版更改: The program full path is now used for sys.executable, instead of the program name.

3.11 版后已移除.

const char *Py_GetVersion()¶

Part of the Stable ABI.

Return the version of this Python interpreter. This is a string that looks something like

"3.0a5+ (py3k:63103M, May 12 2008, 00:53:55) \n[GCC 4.2.3]"

The first word (up to the first space character) is the current Python version; the first characters are the major and minor version separated by a period. The returned string points into static storage; the caller should not modify its value. The value is available to Python code as sys.version.

线程状态和全局解释器锁¶

The Python interpreter is not fully thread-safe. In order to support multi-threaded Python programs, there's a global lock, called the global interpreter lock or GIL, that must be held by the current thread before it can safely access Python objects. Without the lock, even the simplest operations could cause problems in a multi-threaded program: for example, when two threads simultaneously increment the reference count of the same object, the reference count could end up being incremented only once instead of twice.

Therefore, the rule exists that only the thread that has acquired the GIL may operate on Python objects or call Python/C API functions. In order to emulate concurrency of execution, the interpreter regularly tries to switch threads (see sys.setswitchinterval()). The lock is also released around potentially blocking I/O operations like reading or writing a file, so that other Python threads can run in the meantime.

The Python interpreter keeps some thread-specific bookkeeping information inside a data structure called PyThreadState. There's also one global variable pointing to the current PyThreadState: it can be retrieved using PyThreadState_Get().

从扩展扩展代码中释放 GIL¶

大多数操作 GIL 的扩展代码具有以下简单结构：

Save the thread state in a local variable.
Release the global interpreter lock.
... Do some blocking I/O operation ...
Reacquire the global interpreter lock.
Restore the thread state from the local variable.

这是如此常用因此增加了一对宏来简化它:

Py_BEGIN_ALLOW_THREADS
... Do some blocking I/O operation ...
Py_END_ALLOW_THREADS

Py_BEGIN_ALLOW_THREADS 宏将打开一个新块并声明一个隐藏的局部变量；Py_END_ALLOW_THREADS 宏将关闭这个块。

上面的代码块可扩展为下面的代码:

PyThreadState *_save;

_save = PyEval_SaveThread();
... Do some blocking I/O operation ...
PyEval_RestoreThread(_save);

Here is how these functions work: the global interpreter lock is used to protect the pointer to the current thread state. When releasing the lock and saving the thread state, the current thread state pointer must be retrieved before the lock is released (since another thread could immediately acquire the lock and store its own thread state in the global variable). Conversely, when acquiring the lock and restoring the thread state, the lock must be acquired before storing the thread state pointer.

备注

Calling system I/O functions is the most common use case for releasing the GIL, but it can also be useful before calling long-running computations which don't need access to Python objects, such as compression or cryptographic functions operating over memory buffers. For example, the standard zlib and hashlib modules release the GIL when compressing or hashing data.

非Python创建的线程¶

When threads are created using the dedicated Python APIs (such as the threading module), a thread state is automatically associated to them and the code showed above is therefore correct. However, when threads are created from C (for example by a third-party library with its own thread management), they don't hold the GIL, nor is there a thread state structure for them.

If you need to call Python code from these threads (often this will be part of a callback API provided by the aforementioned third-party library), you must first register these threads with the interpreter by creating a thread state data structure, then acquiring the GIL, and finally storing their thread state pointer, before you can start using the Python/C API. When you are done, you should reset the thread state pointer, release the GIL, and finally free the thread state data structure.

The PyGILState_Ensure() and PyGILState_Release() functions do all of the above automatically. The typical idiom for calling into Python from a C thread is:

PyGILState_STATE gstate;
gstate = PyGILState_Ensure();

/* Perform Python actions here. */
result = CallSomeFunction();
/* evaluate result or handle exception */

/* Release the thread. No Python API allowed beyond this point. */
PyGILState_Release(gstate);

Note that the PyGILState_* functions assume there is only one global interpreter (created automatically by Py_Initialize()). Python supports the creation of additional interpreters (using Py_NewInterpreter()), but mixing multiple interpreters and the PyGILState_* API is unsupported.

Cautions about fork()¶

Another important thing to note about threads is their behaviour in the face of the C fork() call. On most systems with fork(), after a process forks only the thread that issued the fork will exist. This has a concrete impact both on how locks must be handled and on all stored state in CPython's runtime.

The fact that only the "current" thread remains means any locks held by other threads will never be released. Python solves this for os.fork() by acquiring the locks it uses internally before the fork, and releasing them afterwards. In addition, it resets any 锁对象 in the child. When extending or embedding Python, there is no way to inform Python of additional (non-Python) locks that need to be acquired before or reset after a fork. OS facilities such as pthread_atfork() would need to be used to accomplish the same thing. Additionally, when extending or embedding Python, calling fork() directly rather than through os.fork() (and returning to or calling into Python) may result in a deadlock by one of Python's internal locks being held by a thread that is defunct after the fork. PyOS_AfterFork_Child() tries to reset the necessary locks, but is not always able to.

The fact that all other threads go away also means that CPython's runtime state there must be cleaned up properly, which os.fork() does. This means finalizing all other PyThreadState objects belonging to the current interpreter and all other PyInterpreterState objects. Due to this and the special nature of the "main" interpreter, fork() should only be called in that interpreter's "main" thread, where the CPython global runtime was originally initialized. The only exception is if exec() will be called immediately after.

高阶 API¶

These are the most commonly used types and functions when writing C extension code, or when embedding the Python interpreter:

type PyInterpreterState¶

Part of the Limited API (as an opaque struct).

This data structure represents the state shared by a number of cooperating threads. Threads belonging to the same interpreter share their module administration and a few other internal items. There are no public members in this structure.

Threads belonging to different interpreters initially share nothing, except process state like available memory, open file descriptors and such. The global interpreter lock is also shared by all threads, regardless of to which interpreter they belong.

type PyThreadState¶

Part of the Limited API (as an opaque struct).

This data structure represents the state of a single thread. The only public data member is:

PyInterpreterState *interp¶: 该线程的解释器状态。

void PyEval_InitThreads()¶

Part of the Stable ABI.

不执行任何操作的已弃用函数。

在 Python 3.6 及更老的版本中，此函数会在 GIL 不存在时创建它。

在 3.9 版更改: 此函数现在不执行任何操作。

在 3.7 版更改: 该函数现在由 Py_Initialize() 调用，因此你无需再自行调用它。

在 3.2 版更改: This function cannot be called before Py_Initialize() anymore.

3.9 版后已移除.

int PyEval_ThreadsInitialized()¶: Part of the Stable ABI.
Returns a non-zero value if PyEval_InitThreads() has been called. This function can be called without holding the GIL, and therefore can be used to avoid calls to the locking API when running single-threaded.

在 3.7 版更改: The GIL is now initialized by Py_Initialize().

3.9 版后已移除.

PyThreadState *PyEval_SaveThread()¶: Part of the Stable ABI.
Release the global interpreter lock (if it has been created) and reset the thread state to NULL, returning the previous thread state (which is not NULL). If the lock has been created, the current thread must have acquired it.

void PyEval_RestoreThread(PyThreadState *tstate)¶: Part of the Stable ABI.
Acquire the global interpreter lock (if it has been created) and set the thread state to tstate, which must not be NULL. If the lock has been created, the current thread must not have acquired it, otherwise deadlock ensues.

备注

Calling this function from a thread when the runtime is finalizing will terminate the thread, even if the thread was not created by Python. You can use _Py_IsFinalizing() or sys.is_finalizing() to check if the interpreter is in process of being finalized before calling this function to avoid unwanted termination.

PyThreadState *PyThreadState_Get()¶: Part of the Stable ABI.
Return the current thread state. The global interpreter lock must be held. When the current thread state is NULL, this issues a fatal error (so that the caller needn't check for NULL).

PyThreadState *PyThreadState_Swap(PyThreadState *tstate)¶: Part of the Stable ABI.
Swap the current thread state with the thread state given by the argument tstate, which may be NULL. The global interpreter lock must be held and is not released.

The following functions use thread-local storage, and are not compatible with sub-interpreters:

PyGILState_STATE PyGILState_Ensure()¶

Part of the Stable ABI.

Ensure that the current thread is ready to call the Python C API regardless of the current state of Python, or of the global interpreter lock. This may be called as many times as desired by a thread as long as each call is matched with a call to PyGILState_Release(). In general, other thread-related APIs may be used between PyGILState_Ensure() and PyGILState_Release() calls as long as the thread state is restored to its previous state before the Release(). For example, normal usage of the Py_BEGIN_ALLOW_THREADS and Py_END_ALLOW_THREADS macros is acceptable.

The return value is an opaque "handle" to the thread state when PyGILState_Ensure() was called, and must be passed to PyGILState_Release() to ensure Python is left in the same state. Even though recursive calls are allowed, these handles cannot be shared - each unique call to PyGILState_Ensure() must save the handle for its call to PyGILState_Release().

When the function returns, the current thread will hold the GIL and be able to call arbitrary Python code. Failure is a fatal error.

备注

Calling this function from a thread when the runtime is finalizing will terminate the thread, even if the thread was not created by Python. You can use _Py_IsFinalizing() or sys.is_finalizing() to check if the interpreter is in process of being finalized before calling this function to avoid unwanted termination.

void PyGILState_Release(PyGILState_STATE)¶

Part of the Stable ABI.

Release any resources previously acquired. After this call, Python's state will be the same as it was prior to the corresponding PyGILState_Ensure() call (but generally this state will be unknown to the caller, hence the use of the GILState API).

Every call to PyGILState_Ensure() must be matched by a call to PyGILState_Release() on the same thread.

PyThreadState *PyGILState_GetThisThreadState()¶: Part of the Stable ABI.
Get the current thread state for this thread. May return NULL if no GILState API has been used on the current thread. Note that the main thread always has such a thread-state, even if no auto-thread-state call has been made on the main thread. This is mainly a helper/diagnostic function.

int PyGILState_Check()¶: Return 1 if the current thread is holding the GIL and 0 otherwise. This function can be called from any thread at any time. Only if it has had its Python thread state initialized and currently is holding the GIL will it return 1. This is mainly a helper/diagnostic function. It can be useful for example in callback contexts or memory allocation functions when knowing that the GIL is locked can allow the caller to perform sensitive actions or otherwise behave differently.

3.4 新版功能.

The following macros are normally used without a trailing semicolon; look for example usage in the Python source distribution.

Py_BEGIN_ALLOW_THREADS¶: Part of the Stable ABI.
This macro expands to { PyThreadState *_save; _save = PyEval_SaveThread();. Note that it contains an opening brace; it must be matched with a following Py_END_ALLOW_THREADS macro. See above for further discussion of this macro.

Py_END_ALLOW_THREADS¶: Part of the Stable ABI.
此宏扩展为 PyEval_RestoreThread(_save); }。注意它包含一个右花括号；它必须与之前的 Py_BEGIN_ALLOW_THREADS 宏匹配。请参阅上文以进一步讨论此宏。

Py_BLOCK_THREADS¶: Part of the Stable ABI.
这个宏扩展为 PyEval_RestoreThread(_save);: 它等价于没有关闭花括号的 Py_END_ALLOW_THREADS。

Py_UNBLOCK_THREADS¶: Part of the Stable ABI.
这个宏扩展为 _save = PyEval_SaveThread();: 它等价于没有开始花括号和变量声明的 Py_BEGIN_ALLOW_THREADS。

底层级 API¶

All of the following functions must be called after Py_Initialize().

在 3.7 版更改: Py_Initialize() now initializes the GIL.

PyInterpreterState *PyInterpreterState_New()¶

Part of the Stable ABI.

Create a new interpreter state object. The global interpreter lock need not be held, but may be held if it is necessary to serialize calls to this function.

Raises an auditing event cpython.PyInterpreterState_New with no arguments.

void PyInterpreterState_Clear(PyInterpreterState *interp)¶

Part of the Stable ABI.

Reset all information in an interpreter state object. The global interpreter lock must be held.

Raises an auditing event cpython.PyInterpreterState_Clear with no arguments.

void PyInterpreterState_Delete(PyInterpreterState *interp)¶: Part of the Stable ABI.
Destroy an interpreter state object. The global interpreter lock need not be held. The interpreter state must have been reset with a previous call to PyInterpreterState_Clear().

PyThreadState *PyThreadState_New(PyInterpreterState *interp)¶: Part of the Stable ABI.
创建属于给定解释器对象的新线程状态对象。全局解释器锁不需要保持，但如果需要序列化对此函数的调用，则可以保持。

void PyThreadState_Clear(PyThreadState *tstate)¶: Part of the Stable ABI.
Reset all information in a thread state object. The global interpreter lock must be held.

在 3.9 版更改: This function now calls the PyThreadState.on_delete callback. Previously, that happened in PyThreadState_Delete().

void PyThreadState_Delete(PyThreadState *tstate)¶: Part of the Stable ABI.
Destroy a thread state object. The global interpreter lock need not be held. The thread state must have been reset with a previous call to PyThreadState_Clear().

void PyThreadState_DeleteCurrent(void)¶: Destroy the current thread state and release the global interpreter lock. Like PyThreadState_Delete(), the global interpreter lock need not be held. The thread state must have been reset with a previous call to PyThreadState_Clear().

PyFrameObject *PyThreadState_GetFrame(PyThreadState *tstate)¶

Part of the Stable ABI since version 3.10.

Get the current frame of the Python thread state tstate.

Return a strong reference. Return NULL if no frame is currently executing.

子解释器支持¶

While in most uses, you will only embed a single Python interpreter, there are cases where you need to create several independent interpreters in the same process and perhaps even in the same thread. Sub-interpreters allow you to do that.

The "main" interpreter is the first one created when the runtime initializes. It is usually the only Python interpreter in a process. Unlike sub-interpreters, the main interpreter has unique process-global responsibilities like signal handling. It is also responsible for execution during runtime initialization and is usually the active interpreter during runtime finalization. The PyInterpreterState_Main() function returns a pointer to its state.

You can switch between sub-interpreters using the PyThreadState_Swap() function. You can create and destroy them using the following functions:

PyThreadState *Py_NewInterpreter()¶

Part of the Stable ABI.

Create a new sub-interpreter. This is an (almost) totally separate environment for the execution of Python code. In particular, the new interpreter has separate, independent versions of all imported modules, including the fundamental modules builtins, __main__ and sys. The table of loaded modules (sys.modules) and the module search path (sys.path) are also separate. The new environment has no sys.argv variable. It has new standard I/O stream file objects sys.stdin, sys.stdout and sys.stderr (however these refer to the same underlying file descriptors).

The return value points to the first thread state created in the new sub-interpreter. This thread state is made in the current thread state. Note that no actual thread is created; see the discussion of thread states below. If creation of the new interpreter is unsuccessful, NULL is returned; no exception is set since the exception state is stored in the current thread state and there may not be a current thread state. (Like all other Python/C API functions, the global interpreter lock must be held before calling this function and is still held when it returns; however, unlike most other Python/C API functions, there needn't be a current thread state on entry.)

Extension modules are shared between (sub-)interpreters as follows:

For modules using multi-phase initialization, e.g. PyModule_FromDefAndSpec(), a separate module object is created and initialized for each interpreter. Only C-level static and global variables are shared between these module objects.
For modules using single-phase initialization, e.g. PyModule_Create(), the first time a particular extension is imported, it is initialized normally, and a (shallow) copy of its module's dictionary is squirreled away. When the same extension is imported by another (sub-)interpreter, a new module is initialized and filled with the contents of this copy; the extension's init function is not called. Objects in the module's dictionary thus end up shared across (sub-)interpreters, which might cause unwanted behavior (see Bugs and caveats below).

Note that this is different from what happens when an extension is imported after the interpreter has been completely re-initialized by calling Py_FinalizeEx() and Py_Initialize(); in that case, the extension's initmodule function is called again. As with multi-phase initialization, this means that only C-level static and global variables are shared between these modules.

void Py_EndInterpreter(PyThreadState *tstate)¶: Part of the Stable ABI.
Destroy the (sub-)interpreter represented by the given thread state. The given thread state must be the current thread state. See the discussion of thread states below. When the call returns, the current thread state is NULL. All thread states associated with this interpreter are destroyed. (The global interpreter lock must be held before calling this function and is still held when it returns.) Py_FinalizeEx() will destroy all sub-interpreters that haven't been explicitly destroyed at that point.

错误和警告¶

Because sub-interpreters (and the main interpreter) are part of the same process, the insulation between them isn't perfect --- for example, using low-level file operations like os.close() they can (accidentally or maliciously) affect each other's open files. Because of the way extensions are shared between (sub-)interpreters, some extensions may not work properly; this is especially likely when using single-phase initialization or (static) global variables. It is possible to insert objects created in one sub-interpreter into a namespace of another (sub-)interpreter; this should be avoided if possible.

Special care should be taken to avoid sharing user-defined functions, methods, instances or classes between sub-interpreters, since import operations executed by such objects may affect the wrong (sub-)interpreter's dictionary of loaded modules. It is equally important to avoid sharing objects from which the above are reachable.

Also note that combining this functionality with PyGILState_* APIs is delicate, because these APIs assume a bijection between Python thread states and OS-level threads, an assumption broken by the presence of sub-interpreters. It is highly recommended that you don't switch sub-interpreters between a pair of matching PyGILState_Ensure() and PyGILState_Release() calls. Furthermore, extensions (such as ctypes) using these APIs to allow calling of Python code from non-Python created threads will probably be broken when using sub-interpreters.

异步通知¶

A mechanism is provided to make asynchronous notifications to the main interpreter thread. These notifications take the form of a function pointer and a void pointer argument.

int Py_AddPendingCall(int (*func)(void*), void *arg)¶

Part of the Stable ABI.

Schedule a function to be called from the main interpreter thread. On success, 0 is returned and func is queued for being called in the main thread. On failure, -1 is returned without setting any exception.

When successfully queued, func will be eventually called from the main interpreter thread with the argument arg. It will be called asynchronously with respect to normally running Python code, but with both these conditions met:

on a bytecode boundary;
with the main thread holding the global interpreter lock (func can therefore use the full C API).

func must return 0 on success, or -1 on failure with an exception set. func won't be interrupted to perform another asynchronous notification recursively, but it can still be interrupted to switch threads if the global interpreter lock is released.

This function doesn't need a current thread state to run, and it doesn't need the global interpreter lock.

To call this function in a subinterpreter, the caller must hold the GIL. Otherwise, the function func can be scheduled to be called from the wrong interpreter.

警告

This is a low-level function, only useful for very special cases. There is no guarantee that func will be called as quick as possible. If the main thread is busy executing a system call, func won't be called before the system call returns. This function is generally not suitable for calling Python code from arbitrary C threads. Instead, use the PyGILState API.

在 3.9 版更改: If this function is called in a subinterpreter, the function func is now scheduled to be called from the subinterpreter, rather than being called from the main interpreter. Each subinterpreter now has its own list of scheduled calls.

3.1 新版功能.

分析和跟踪¶

The Python interpreter provides some low-level support for attaching profiling and execution tracing facilities. These are used for profiling, debugging, and coverage analysis tools.

This C interface allows the profiling or tracing code to avoid the overhead of calling through Python-level callable objects, making a direct C function call instead. The essential attributes of the facility have not changed; the interface allows trace functions to be installed per-thread, and the basic events reported to the trace function are the same as had been reported to the Python-level trace functions in previous versions.

typedef int (*Py_tracefunc)(PyObject *obj, PyFrameObject *frame, int what, PyObject *arg)¶

The type of the trace function registered using PyEval_SetProfile() and PyEval_SetTrace(). The first parameter is the object passed to the registration function as obj, frame is the frame object to which the event pertains, what is one of the constants PyTrace_CALL, PyTrace_EXCEPTION, PyTrace_LINE, PyTrace_RETURN, PyTrace_C_CALL, PyTrace_C_EXCEPTION, PyTrace_C_RETURN, or PyTrace_OPCODE, and arg depends on the value of what:

what 的值	arg 的含义
`PyTrace_CALL`	总是 `Py_None`.
`PyTrace_EXCEPTION`	`sys.exc_info()` 返回的异常信息。
`PyTrace_LINE`	总是 `Py_None`.
`PyTrace_RETURN`	返回给调用方的值，或者如果是由异常导致的则返回 `NULL`。
`PyTrace_C_CALL`	正在调用函数对象。
`PyTrace_C_EXCEPTION`	正在调用函数对象。
`PyTrace_C_RETURN`	正在调用函数对象。
`PyTrace_OPCODE`	总是 `Py_None`.

int PyTrace_CALL¶: The value of the what parameter to a Py_tracefunc function when a new call to a function or method is being reported, or a new entry into a generator. Note that the creation of the iterator for a generator function is not reported as there is no control transfer to the Python bytecode in the corresponding frame.

int PyTrace_EXCEPTION¶: The value of the what parameter to a Py_tracefunc function when an exception has been raised. The callback function is called with this value for what when after any bytecode is processed after which the exception becomes set within the frame being executed. The effect of this is that as exception propagation causes the Python stack to unwind, the callback is called upon return to each frame as the exception propagates. Only trace functions receives these events; they are not needed by the profiler.

int PyTrace_LINE¶: The value passed as the what parameter to a Py_tracefunc function (but not a profiling function) when a line-number event is being reported. It may be disabled for a frame by setting f_trace_lines to 0 on that frame.

int PyTrace_RETURN¶: The value for the what parameter to Py_tracefunc functions when a call is about to return.

int PyTrace_C_CALL¶: The value for the what parameter to Py_tracefunc functions when a C function is about to be called.

int PyTrace_C_EXCEPTION¶: The value for the what parameter to Py_tracefunc functions when a C function has raised an exception.

int PyTrace_C_RETURN¶: The value for the what parameter to Py_tracefunc functions when a C function has returned.

int PyTrace_OPCODE¶: The value for the what parameter to Py_tracefunc functions (but not profiling functions) when a new opcode is about to be executed. This event is not emitted by default: it must be explicitly requested by setting f_trace_opcodes to 1 on the frame.

void PyEval_SetProfile(Py_tracefunc func, PyObject *obj)¶

Set the profiler function to func. The obj parameter is passed to the function as its first parameter, and may be any Python object, or NULL. If the profile function needs to maintain state, using a different value for obj for each thread provides a convenient and thread-safe place to store it. The profile function is called for all monitored events except PyTrace_LINE PyTrace_OPCODE and PyTrace_EXCEPTION.

See also the sys.setprofile() function.

The caller must hold the GIL.

void PyEval_SetTrace(Py_tracefunc func, PyObject *obj)¶

Set the tracing function to func. This is similar to PyEval_SetProfile(), except the tracing function does receive line-number events and per-opcode events, but does not receive any event related to C function objects being called. Any trace function registered using PyEval_SetTrace() will not receive PyTrace_C_CALL, PyTrace_C_EXCEPTION or PyTrace_C_RETURN as a value for the what parameter.

高级调试器支持¶

These functions are only intended to be used by advanced debugging tools.

PyInterpreterState *PyInterpreterState_Head()¶: Return the interpreter state object at the head of the list of all such objects.

PyInterpreterState *PyInterpreterState_Main()¶: 返回主解释器状态对象。

PyInterpreterState *PyInterpreterState_Next(PyInterpreterState *interp)¶: Return the next interpreter state object after interp from the list of all such objects.

PyThreadState *PyInterpreterState_ThreadHead(PyInterpreterState *interp)¶: Return the pointer to the first PyThreadState object in the list of threads associated with the interpreter interp.

PyThreadState *PyThreadState_Next(PyThreadState *tstate)¶: Return the next thread state object after tstate from the list of all such objects belonging to the same PyInterpreterState object.

线程本地存储支持¶

The Python interpreter provides low-level support for thread-local storage (TLS) which wraps the underlying native TLS implementation to support the Python-level thread local storage API (threading.local). The CPython C level APIs are similar to those offered by pthreads and Windows: use a thread key and functions to associate a void* value per thread.

The GIL does not need to be held when calling these functions; they supply their own locking.

Note that Python.h does not include the declaration of the TLS APIs, you need to include pythread.h to use thread-local storage.

备注

None of these API functions handle memory management on behalf of the void* values. You need to allocate and deallocate them yourself. If the void* values happen to be PyObject*, these functions don't do refcount operations on them either.

Thread Specific Storage (TSS) API¶

TSS API is introduced to supersede the use of the existing TLS API within the CPython interpreter. This API uses a new type Py_tss_t instead of int to represent thread keys.

3.7 新版功能.

参见

"A New C-API for Thread-Local Storage in CPython" (PEP 539)

type Py_tss_t¶

This data structure represents the state of a thread key, the definition of which may depend on the underlying TLS implementation, and it has an internal field representing the key's initialization state. There are no public members in this structure.

When Py_LIMITED_API is not defined, static allocation of this type by Py_tss_NEEDS_INIT is allowed.

Py_tss_NEEDS_INIT¶: This macro expands to the initializer for Py_tss_t variables. Note that this macro won't be defined with Py_LIMITED_API.

Dynamic Allocation¶

Dynamic allocation of the Py_tss_t, required in extension modules built with Py_LIMITED_API, where static allocation of this type is not possible due to its implementation being opaque at build time.

Py_tss_t *PyThread_tss_alloc()¶: Part of the Stable ABI since version 3.7.
Return a value which is the same state as a value initialized with Py_tss_NEEDS_INIT, or NULL in the case of dynamic allocation failure.

void PyThread_tss_free(Py_tss_t *key)¶: Part of the Stable ABI since version 3.7.
Free the given key allocated by PyThread_tss_alloc(), after first calling PyThread_tss_delete() to ensure any associated thread locals have been unassigned. This is a no-op if the key argument is NULL.

备注

A freed key becomes a dangling pointer. You should reset the key to NULL.

方法¶

The parameter key of these functions must not be NULL. Moreover, the behaviors of PyThread_tss_set() and PyThread_tss_get() are undefined if the given Py_tss_t has not been initialized by PyThread_tss_create().

int PyThread_tss_is_created(Py_tss_t *key)¶: Part of the Stable ABI since version 3.7.
Return a non-zero value if the given Py_tss_t has been initialized by PyThread_tss_create().

int PyThread_tss_create(Py_tss_t *key)¶: Part of the Stable ABI since version 3.7.
Return a zero value on successful initialization of a TSS key. The behavior is undefined if the value pointed to by the key argument is not initialized by Py_tss_NEEDS_INIT. This function can be called repeatedly on the same key -- calling it on an already initialized key is a no-op and immediately returns success.

void PyThread_tss_delete(Py_tss_t *key)¶: Part of the Stable ABI since version 3.7.
Destroy a TSS key to forget the values associated with the key across all threads, and change the key's initialization state to uninitialized. A destroyed key is able to be initialized again by PyThread_tss_create(). This function can be called repeatedly on the same key -- calling it on an already destroyed key is a no-op.

int PyThread_tss_set(Py_tss_t *key, void *value)¶: Part of the Stable ABI since version 3.7.
Return a zero value to indicate successfully associating a void* value with a TSS key in the current thread. Each thread has a distinct mapping of the key to a void* value.

void *PyThread_tss_get(Py_tss_t *key)¶: Part of the Stable ABI since version 3.7.
Return the void* value associated with a TSS key in the current thread. This returns NULL if no value is associated with the key in the current thread.

Thread Local Storage (TLS) API¶

3.7 版后已移除: This API is superseded by Thread Specific Storage (TSS) API.

备注

This version of the API does not support platforms where the native TLS key is defined in a way that cannot be safely cast to int. On such platforms, PyThread_create_key() will return immediately with a failure status, and the other TLS functions will all be no-ops on such platforms.

由于上面提到的兼容性问题，不应在新代码中使用此版本的API。

int PyThread_create_key()¶: Part of the Stable ABI.

void PyThread_delete_key(int key)¶: Part of the Stable ABI.

int PyThread_set_key_value(int key, void *value)¶: Part of the Stable ABI.

void *PyThread_get_key_value(int key)¶: Part of the Stable ABI.

void PyThread_delete_key_value(int key)¶: Part of the Stable ABI.

void PyThread_ReInitTLS()¶: Part of the Stable ABI.

初始化，终结和线程¶

在Python初始化之前¶

全局配置变量¶

初始化和最终化解释器¶

进程级参数¶

线程状态和全局解释器锁¶

从扩展扩展代码中释放 GIL¶

非Python创建的线程¶

Cautions about fork()¶

高阶 API¶

底层级 API¶

子解释器支持¶

错误和警告¶

异步通知¶

分析和跟踪¶

高级调试器支持¶

线程本地存储支持¶

Thread Specific Storage (TSS) API¶

Dynamic Allocation¶

方法¶

Thread Local Storage (TLS) API¶

目录

上一个主题

下一个主题

当前页面